SOLUTIONS
SOLUTIONS

Practicality, Dedication, Cooperation and Win-Win

Scroll Down
"Chinese Color · Beautiful World" Zhuhai Huacai made a stunning appearance at CSGIA China International Screen Printing Exhibition!

"Chinese Color · Beautiful World" Zhuhai Huacai made a stunning appearance at CSGIA China International Screen Printing Exhibition!

2018.11.21-23, Zhuhai Huacai appeared in CSGIA Guangzhou Screen Printing Exhibition with a new attitude! At this exhibition, Huacai displayed the 4720 thermal transfer ink printing solution and EPSON white color co-printing coating solution on site, attracting domestic and foreign customers to stop for consultation and negotiation! exhibition site plan display 4720 Thermal Transfer Ink Printing Solution and EPSON White Color Coating Dry Printing Solution Printed product display

07

2020

/

12

Zhuhai Huacai invites you to meet at FESPA China Digital Printing Exhibition in November 2016

Zhuhai Huacai invites you to meet at FESPA China Digital Printing Exhibition in November 2016

The annual FESPA Digital Printing Exhibition will be held in Guangzhou, Guangdong from November 21 to 23, 2016. It will last for three days. Zhuhai Huacai sincerely invites you to participate. Huacai is a fine chemical enterprise integrating production, research and development, and sales. The company's products cover UV, sublimation, eco-solvent, direct injection coatings, etc., providing all-medium inkjet solutions to customers around the world. Highlights of this exhibition: Eco-solvent leather printing solution MimakiDX5 on-site printing display Highlight two: Pure cotton coating direct spray and wet beating scheme Nuocai Epson double-head white color printing and display at the same place Highlight three: Thin paper solution Ricoh Ricoh G5 four-head 48g thin paper non-stop high-speed printing live demonstration Huacai has always been adhering to the business philosophy of "100 Quality, 100 Service", in order to satisfy the market, continuous research and development and innovation, adhere to the core of economy, environmental protection and low energy consumption, to provide customers with high-quality products and services. Welcome to inquire: 0756-8597566!

20

2016

/

12

Zhuhai Huacai appeared at ITMA Asia Textile Exhibition in October 2016

Zhuhai Huacai appeared at ITMA Asia Textile Exhibition in October 2016

The ITMA Asia Textile Exhibition 2016 was held at the Shanghai National Convention and Exhibition Center from October 21st to 25th, and it ended perfectly for five days. As a professional ink manufacturer, Zhuhai Huacai brought the company's main product Dye Sublimation 5113 thin paper solution, paint wet printing solution, leather printing solution, etc. to the exhibition, which won praise and favor. Huacai has always been adhering to the business philosophy of "100 Quality, 100 Service", in order to satisfy the market, continuous research and development and innovation, adhere to the core of economy, environmental protection and low energy consumption, to provide customers with quality products and services. Welcome to inquire: 0756-8597566!

20

2016

/

12

Zhuhai Huacai participated in the Shanghai International Advertising Four New Exhibition in July 2016

Zhuhai Huacai participated in the Shanghai International Advertising Four New Exhibition in July 2016

From July 5th to 7th, 2016, the Shanghai International Advertising Four New Exhibition was grandly held at the Shanghai International Expo Center. With the gradual growth of many Chinese advertising equipment manufacturers, the Shanghai International Advertising Four New Exhibition has witnessed the history and development of a large number of advertising equipment manufacturers, and will continue to join hands with more advertising equipment manufacturers to advance together. 华彩不断寻求突破创新，依然从工业墨水产品本身出发，领先行业研发技术,强势推出了直 喷涂料墨水,受到极大关注和众多好评。 展会新品直喷涂料墨水采用进口高端色料研磨，色彩亮丽、白墨浓度高、耐水洗度高，符合现代个性化市场的需求, 以此赢得了现场众多国内外客户青睐！        华彩作为专业的墨水生产商之一,凭借雄厚的研发势力、团队实力和绝对的执行力，真诚的服务于每一位客户！与您共同努力，携手共创未来，真诚期待您的加入！

20

2016

/

12

The 7th DPES Exhibition of Zhuhai Huacai in September 2015 ended perfectly

The 7th DPES Exhibition of Zhuhai Huacai in September 2015 ended perfectly

The largest advertising and printing industry event in Southeast Asia-"The 7th DPES Guangzhou (Autumn) Advertising Standard Exhibition" was held from September 9, 2015 to September 11, 2015 in the Poly World Trade Center, Guangzhou, for three The day ended successfully. As a professional ink manufacturer, Zhuhai Huacai has brought the company's advantages to the exhibition. Its main products are led-uv, heat transfer printing, weak solvent advertising, weak solvent leather and other inks. This exhibition should be professional and Huacai has been doing quality and reputation, attracting many new and old customers to visit, consult and understand the products. In this exhibition, there are also colorful new products weak solvent white ink, which opened a new field of leather market and solved the printing problems of many customers on dark leather. At the exhibition, our weak solvent leather ink and weak solvent white ink cooperated with customers' machines to display the printing effect on the spot, attracting many customers to visit, and a large number of customers placed orders to take samples on site. The recognition and satisfaction of new products by the market is the greatest encouragement and support for the R & D strength and quality of our manufacturers.   As a professional ink manufacturer, Zhuhai Huacai is constantly seeking breakthrough and innovation. With its strong R & D force and team strength, Zhuhai Huacai sincerely serves every customer! Work with you to create the future hand in hand!

12

2016

/

12

Zhuhai Huacai Shanghai Advertising Four New Exhibition in July 2015 ended successfully

Zhuhai Huacai Shanghai Advertising Four New Exhibition in July 2015 ended successfully

The 16th Shanghai Advertising Four New Exhibition was held in Shanghai New International Convention and Exhibition Center from June 30 to July 02, 2015, and ended successfully in 3 days. As a professional ink manufacturer, Zhuhai Huacai, with the advantages of the company's main products, such as led-uv ink and heat transfer ink, appeared in this exhibition, attracting many customers to consult and understand the products. Huacai also brought a new weak solvent pigment to the exhibition. Once it appeared, customers immediately placed an order. The new product was recognized by the market so quickly, which is our greatest encouragement and support As a professional ink manufacturer, Zhuhai Huacai is constantly seeking breakthrough and innovation. Relying on its strong R & D force and team strength, Zhuhai Huacai sincerely serves every customer! Work with you to create the future hand in hand!

12

2016

/

12

Reasons and methods of poor curing effect of uv printer ink

Reasons and methods of poor curing effect of uv printer ink

Some industry personnel often encounter the phenomenon of incomplete curing of UV ink and sticky surface during the printing and production process of uv printers, which results in unsatisfactory printing results. How is this phenomenon caused? How to solve this phenomenon so as to ensure the print quality, here is a small series of information for everyone to share. UV curing light source power is not enough There are three elements of uv printer uv light curing: 1. Spectrum, that is, whether the light emitted by the light source such as UV lamp is consistent with the absorption spectrum of the cured product. 2. Intensity, that is, whether the light emitted by the light source is sufficient to cause a photochemical reaction of the cured product. Due to the performance and dosage of the sensitizer inside the cured product (UV coating, ink, glue), the light transmittance of the main agent and the amount of agent , Sensibility is also different, so the curing strength requirements are different. 3. Curing speed. Too fast the curing speed can not complete the curing, and too slow will have an adverse effect on the cured product. Such as pattern cracking, poor adhesion, etc. The curing speed varies with different cured products. The fast printing speed of the Uv printer is also the cause of the incomplete curing of the UV ink and the sticky surface. At this time, the printing speed can be reduced or the light source power can be increased. UV curing lamp aging UV lamp tube mainly refers to the lamp tube that can emit ultraviolet light. When it emits light, it is accompanied by high heat, because it not only excites ultraviolet light, but also accompanied by infrared emission. The wavelength of light is concentrated at about 365mm. The proportion of infrared rays depends on different quality. The content of the lamp tube is different. Normal domestic UV lamps have about 30% longer ultraviolet rays, while imported UV lamps have 40-50% content. At the same time, they have low heat generation and long service life, up to 2000 hours, while domestic UV lamps only have 1000 hours. about. With the use of the lamp, the electrode gradually decomposes, and the inner wall of the lamp is deposited, and the transparency and the transmittance of ultraviolet light are gradually weakened. Therefore, the lamp of the uv printer should be tested regularly and the lamp should be replaced in time. UV ink itself has slow curing speed Photo-curing refers to a certain photochemical reaction of UV ink or UV coating under the effective irradiation of ultraviolet rays, so that the cured product becomes liquid and cured to form a pattern. This process can add a photo-curing accelerator to reduce the printing speed or find ink The supplier resolves.

27

2016

/

04

Nozzle classification: nozzle knowledge you should know about printing

Nozzle classification: nozzle knowledge you should know about printing

Seiko SPT nozzle series Produced by the Seiko Electronics Group of Japan, Seiko was first known all over the world for the production of precision clocks. Now it has considerable strength and foundation in the production of cartridge piezoelectric nozzles, and its stability is just like its Seiko watches. The same quality is superb. SPT nozzles are finally designed by combining the performance advantages of all previous nozzles. While focusing on the previous advantages, they are also mainly reflected in: a. The main performance is the all-stainless steel design, with super durability, and there are 510 pipes for each nozzle. b. Nozzle voltage can change with temperature, so it can be troubled by other nozzles due to temperature and other external factors. c. The data port of the print head can adapt to different printing software, and the print density is more dependent than the previous print head? d. It can be produced in multiple modes. The ink dot particles are 35PL and 12PL, the highest standard precision is 720DPI and 1440DPI, and the color saturation is impeccable. e. The print width of the print head is 75mm, which is 4 times that of the ordinary print head, and can output quickly. f. It has a wide range of applications and is currently used in industrial and commercial printing. g. The cost is low and it tends to be popular. At present, the brands that mainly use Japanese Seiko SPT nozzles are: Feiteng, Xtreme, Jinghui, Gongzheng, etc. Japan Konica nozzle series Konica sprinklers are a newly promoted Japanese brand. Its company first focused on imaging and just stepped into the production of piezoelectric sprinklers. It has also been successful in hardware facilities, but it has too much publicity on domestic agents. Among them, KonicaMinolta 512 print head, according to scientific calculation, its ink dot size is only 56/28PL, and its accuracy is about 720DPI. However, its publicity as 42/14PL has caused many consumers to misunderstand. In addition, its ink is not provided by professional manufacturers. Supervision on the production line is not very strict. Among them, the only successful inkjet printer using Konica nozzles is Yasseran, but due to the brand effect, the price remains high in the industry, and there is no certain flexibility in after-sales service. At present, the brands that mainly use Japanese Konica nozzles are: Yaselan, Aowei, Cheetah, West, Mejet, Blueprint, etc. British XAAR (Xaar) nozzle series The main nozzles produced by XAAR are XAAR128, XAAR500, XAAR126 and XAAR382, XAAR600 and other models. Among them, 126 and 128 nozzles were one of the most widely used nozzles in China in the early days. At present, the 382 (proton nozzles) and 600 nozzles are mainly used. At present, the brands that mainly use the British XAAR (Xaar) nozzles are: Cyber, Liyu, Mejet, etc. American Spectra nozzle series Spectra first produced thermal foaming nozzles for office printing, but eventually gave up due to the emergence of HP and switched to the development of industrial piezoelectric nozzles. At present, it has achieved considerable success in this market. Its print head is characterized by small ink droplets (high corresponding accuracy), very high ejection frequency (fast speed), and is not very picky about ink. Wittur is the first brand to adopt Spectra print heads and is also the most popular in the global market. For the well-received inkjet printers, Spectra’s problem is that the price of the print heads is too high. Although Wittur has sold hundreds of units in China, several domestic inkjet printers using Spectra print head manufacturers have not yet become mainstream products and are mainly exported. It is a compact and lightweight container nozzle with stainless steel packaging. All components can be moved quickly. It is suitable for printers with superior performance. The main models are SpectraSl-128 and Spectra Nova/80LQ. Among them, 128 series nozzles have many similarities with XAAR128+ nozzles in terms of stable performance and usability. However, before the successful development of domestic inkjet printers for the Nova256 series, this type of nozzles were basically used exclusively by the inkjet printer manufacturer-Witt Company. From the perspective of the internal structure of the print head, the XAAR print head uses Teflon material in the part where the print head directly contacts the ink, and the Spectra print head uses a steel structure. The ink has a certain corrosion ability. Due to the steel structure of the Spectra nozzle, the corrosion resistance of the nozzle to the ink is greatly improved; the ink is pressed out of the nozzle, and the strong pressure easily deforms the diameter of the nozzle. The steel structure of the Spectra nozzle is better than the XAAR nozzle Teflon The inner coating of the material is more pressure resistant. Therefore, Spectra nozzles have a longer service life than XAAR nozzles, which has changed the view that nozzles

27

2016

/

04

< 123456 >